13mm (1/2") internal diameter rubber oil hose with a stainless steel protective overbraid. SAE 100R6 rated. Working temperature range of -40°C to +120°C. Working pressure range of 400psi (27.85 BAR) and a maximum burst pressure of 1600psi (104 BAR). Suitable for oils (excluding power steering).
1/2 12 Single Braid 20 88 132 352 50 200 10 250 Double Braid 295 10.5 15.75 42 560 1220 Burst pressure not applicable for unbraided hoses Pressure drop in a straight corrugated hose is approximately 1.5 times that of rigid pipe. If this is likely to be significant, it may be
SAE 100 R2 AT Hydraulic Hose with Two Layers of Steel Wire Braid Reinforcement. SAE 100 R2 AT hydraulic hose, also called DIN EN 853 2SN hydraulic hose, is suitable for engineering machinery and continuous working hydraulic equipment.And it has excellent hot oil and impulse resistance.
1SC08 08 1/2” 12.7 19 160 2320 640 9280 -0.80 130 345 1SC10 10 5/8” 16 22.4 130 1885 520 7540 -0.80 150 420 1SC12 12 3/4” 19 25.8 105 1523 420 6090 -0.80 180 490 1 Wire braid hose, compact HWB315 Forcestream® 1SC DIN-EN 857 1 SC Inner surface Synthetic rubber that is resistant to mineral and vegetable oil based hydraulic fluids
1/2 in. Material Rubber Maximum pressure (PSI) 300 PSI Product Length 50 ft. Product Weight 10.32 lb. Shipping Weight 10.25 lb. Temperature range (deg F)-20º F to 165º F Thread size 1/2 in-14 NPT CA Residents Warning - Prop 65 Info
R5 Braided Hose Medium pressure hydraulic hose used for petroleum based-oil lines. TECHNICAL DATA Specifiions Meets or Exceeds SAE 100R5 Tube Black, oil resistant synthetic rubber Reinforcement 1 textile braid and one high tensile steel braid Cover Black, oil resistant, polyester braid Temperature -40°F to +212°F (-40°C to +100°C)
Hose; Applicable Standard Sae 100r14a, Fda Cfr 177.1550; Inside Diameter 1/2 Inch; Outside Diameter 0.63 Inch; Minimum Bend Radius 6.5 Inch; Core Material Ptfe; Reinforcement 304 Stainless Steel Braid; Pressure Rating 1500 Psi; Burst Pressure Rating 6000 Psi At 73 Deg F; Temperature Rating -100 To 450 Deg F; Color Silver; Appliion Adhesive
Braided Hose Fittings provide over-the-cover crimp performance at an economical price, when compared to similar fittings, like Weatherhead U Series Hose Fittings. Braided Hose Fittings are designed for use with most 1-wire and 2-wire hydraulic hoses, including: HT Hydraulax TOUGH ™ hydraulic hose (up to 3/4" ID) PW pressure washer hose
1/4" Bore . CM2T 2 Wire Braided Hose . Hose Burst Pressure: 1600 bar . STANDARDS: EN 857 2SC. ISO 11237 2SC R16. SAE 100R16. Rollover images to enlarge. Cleaning Up A Hydraulic Oil Spill Accidents happen. Knowing how to deal with them is the real challenge. Oil spills are one of the most common types of chemical spills in the workplace
Cobra™ Extreme Pressure Braided Oil Hose is rated at 1000 psi. The 1/2" diameter hose is used primarily for routing leak-free oil lines to and from the oil filter and cooler in a full flow oil set up. It will not split or come loose from your oil fittings no matter what when used with the proper matching fittings.
Features and Advantages: Non-Conductive - Tested to exceed minimum electrical resistance greater than one (1) megohm per inch of hose length at 1000 volts DC. MSHA Approved Flame Resistant Cover. Superior End Retention- no clamps or ferrules required when using Push-On fittings - ends remain attached at 4:1 burst pressure.; Easy to couple - no tools required.
Lines open Mon - Sat 8.30am - 5.30pm. Local Rates Customer Service +44 (0) 1978 663 000 Motorsport Sales +44 (0) 1978 664 466 Performance & Road Sales
Aug 11, 2020· 1.23 in: Maximum Operating Pressure: 800 psi: Minimum Burst Pressure: 3,200 psi: Minimum Bend Radius: 7-1/2 in: Reel Length: 250 ft: Note for Reel Length: Reel may not contain one continuous length of hose. Tube: Oil-Resistant Synthetic Rubber: Nuer of Braids: 1: Reinforcement: One Braid of High-Tensile Steel Wire: Cover: Braided Textile
Cohline Oil Pressure Hose Home / Automotive & Marine / Cohline Automotive Hoses / Cohline H/Temp Oil Pressure Hose Type 2733 / 12mm (1/2) I.D High Temperature Oil Hose 150''''C + Type 2743.1054 Flexible Stainless Steel Braided Hoses - Pumps UK Ltd
Fragola 6000 Series PTFE Lined Stainless Steel Braided Hose is safe for use with highly corrosive uses like brake fluid, power steering and hot oil service. Sold by the foot, available in -3, -4, -6, -8 and -10 AN.
Filter by Pressure. SKU Hose I.D. Hose Od Rated Wp Min Burst Min Bend Coupling Series; R1S-04: 1/8: 0.51
Shop Hobart 00-893444-00002 Hose Braided 1/2 In X 84 In. Unbeatable prices and exceptional customer service from WebstaurantStore.
May 11, 2014· Converting Oil Cooler Lines To AN Stainless Braided Hose Aftermarket hoses can be a problem due to quality and changing lines can be a pain. The idea of using aircraft quality AN fittings and stainless braided hose has been documented in various places on the forum, but not all in one place.
SAE 100R6 low pressure hydraulic hose. Construction. Tube: oil resistant synthetic rubber. Reinforcement: one-braid suitable fiber. Cover: oil and weather resistant synthetic rubber. Temperature:-40 °C to +100 °C (-40 °F to +212 °F).
This two-wire hydraulic hose is a medium pressure hydraulic hose. It contains two braids of high-tensile steel wire for reinforcement. Key Features: • Black, oil resistant synthetic rubber liner • Supports mineral and biological oils from -40°F to +212°F • Polyglycol water-oil emulsions and water up to 185°F • Maximum intermittent temperature is 250°F
Automotive Hydraulic Oil; Parts Washer Cleaners and Solvents; More Automotive Chemicals Automotive Clips and Fasteners. 1/2 H243 Stainless Steel Braided Hose. Package Quantity: 50 Package Weight: 7.5 lbs Burst Pressure:
A-21 in the alog 4660 for part nuering system • Working and burst pressures rated at 73°F (23°C) • Hose dimensions are nominal • Used with PAGE fittings and crimp collar SC300 only • Cannot be used with 90, 91N or 93N Series fittings
RaceFlux''s RH7 stainless braided hose features a blended Nitrile rubber (NBR) and CPE elastomer inner layer for compatibility with most automotive fluids including engine oil, gear oil, transmission fluid, coolants, water, air and vacuum. For use with RaceFlux brand and other traditional AN fittings. Sold by the foot. Features and Benefits